1206619
Yealink UVC86 camera
69 575 Kč incl. VAT
AVHub
Yealink AVHub and AVBridge — two audio and video processors that gather the room's cameras, microphones and speakers and hand them to the host computer over USB. The AVHub is the large processor for a hall with nine cameras, the AVBridge a compact audio box with Dante and a signal extender.
AVHub, up to 9 UVC84 or UVC86 cameras
AVHub, peripherals over one network cable with PoE
AVHub, Multi-Camera IntelliFocus and divisible room
AVBridge, 4×4 Dante channels and AES67
AVBridge, powered from PoE, 13 W
Both are managed by the CT200 and CT300
Order code | Model | What it is | When to choose it |
|---|---|---|---|
1306011 | AVHub (this product) | an audio and video processor for large and extra-large halls | several cameras in one room, central power and management of peripherals |
1303215 | AVBridge | a compact audio box and A/V signal extender | ceiling microphones over Dante, extending image or audio to the host |
Both models are host peripherals, not standalone systems. The meeting is run by the connected computer or the system's compute unit; the processor gathers the room's image and audio.
The AVHub handles up to nine UVC84 or UVC86 cameras in one room
The AVHub takes up to eight VCM34, VCM35 or VCM38 microphone arrays and up to four MSpeaker II sound bars
The AVHub connects up to four CM20 or CS10 ceiling units
Cameras, microphones and speakers connect to the AVHub over a network cable and draw PoE power from it
Camera layouts are set from the Yealink plugin before and during a Microsoft Teams Rooms meeting
The AVHub offers Multi-Camera IntelliFocus, Multi-Stream IntelliFrame on the device and a divisible room mode
The AVBridge has 4×4 Dante channels, the AES67 protocol, a matrix mixer and PEQ for room tuning
The AVBridge is powered from PoE, drawing 13 W at full load and 8 W with no load
The AVHub is a conference audio and video processor for large and extra-large halls. Cameras, microphones and speakers plug into it over a network cable, draw their power from it and are managed from one place, so separate cabling and a separate power supply for every peripheral fall away. The AVBridge is a compact audio box and A/V signal extender measuring 150 × 100 × 28 mm and weighing 315 grams, which brings 4×4 Dante channels, an analogue input and output on Phoenix connectors and conversion of audio and video to USB into the room.
Both models end at the host as a USB device. The AVHub has a USB-B 3.0 port and a Codec port for the host, plus two USB-A 2.0 ports and seven VCH ports for peripherals. The AVBridge converts audio and video to USB and works as an extender, so the camera or the audio can sit far from the host and still arrive over the network. That also covers BYOM working, where the user brings the meeting on their own laptop.
The AVHub is part of the ProAV systems MVC S90-C5U-0041106799 and MVC S98-C5U-0041106797, where it gathers cameras and audio for the MCore 4 compute unit. The AVBridge works with the MeetingBar A40 from firmware 289.320.0.70 and the MeetingBar A50 from firmware 323.320.0.34 and with the MeetingBoard Pro from firmware 331.320.0.30. Both processors are among the devices managed by the CT2001303168 or CT3001303169 controller.
The AVHub gathers up to nine cameras and the whole hall's audio into a single USB connection to the host
Peripherals connect to the AVHub over one network cable including power, so no separate power supply per unit
The AVHub does a divisible room, that is a hall split by a partition into two separately meeting halves
The AVBridge brings Dante and AES67 in a 315 gram box powered from PoE
The AVBridge has a matrix mixer and PEQ, so the room's audio is tuned without a large DSP processor
Neither of them runs the meeting. The host is always a computer or the system's compute unit; the processor only gathers image and audio.
The AVHub has an 80 W PoE budget for peripherals. The size of the hall is set by the sum of their power draw, not by the number of units.
Daisy chaining peripherals is not supported. The topology is a star and EEE must be switched off on the switch.
The AVBridge does not work with the MeetingBar A10, A25 and A30 or with the MeetingBoard C EDLA. With the A40, A50 and MeetingBoard Pro a minimum firmware version applies.
We confirm the AVBridge box contents at order time. The AVHub box holds a power adapter, a 2.5 m USB cable and a 7.5 m network cable.
Which processor for which job
The number of cameras and the type of audio decide. The AVHub where the hall has several cameras, several microphones and several speakers and they are to be powered and managed from one place. The AVBridge where the job is mainly Dante audio or extending the signal between camera and host in a medium or larger room.
Work out the power budget first
The AVHub has its own adapter with a 100 to 240 V input and a 48 V / 2 A output, that is 96 W, and an 80 W PoE budget for connected peripherals. One CS10 ceiling speaker draws 24 W rated, so the budget runs out before the ports do. Walk the system through with us before you quote it to the customer.
The AVBridge goes with some hosts only
The combination with video bars holds for the MeetingBar A40 from firmware 289.320.0.70 and the MeetingBar A50 from firmware 323.320.0.34, and for the MeetingBoard Pro from 331.320.0.30. With the MeetingBar A10, A25 and A30 and with the MeetingBoard C EDLA the combination does not work. Check the firmware version on site before you promise the customer a date.
Ceiling microphone count on the AVBridge
One AVBridge takes up to four CM20 ceiling microphones1303095, or the CM50 ceiling panel 1303096. Speakers alongside them can be Yealink or third party, over Dante or analogue. We confirm the number of CM50 units per AVBridge at order time.
AVHub | a large and extra-large hall, several cameras, ceiling or tabletop audio powered from the processor |
|---|---|
AVBridge | a medium and large room, ceiling microphones over Dante, extending image or audio to the host |
Divisible hall | the AVHub has a divisible room mode, where a partition splits the hall into two halves |
Place in the portfolio | AV processors, that is the stage between the room's peripherals and the host computer |
A hall where one camera is not enough and the image is built from several angles. An install where cabling is to be reduced to one network cable per peripheral. A room with a ceiling microphone and a requirement for Dante or AES67. A hall divisible by a partition into two meeting halves. BYOM working from the user's laptop.
How many peripherals the system needs and at what power draw, the AVHub PoE budget is 80 W. What firmware the host runs, with the AVBridge that is a condition. How many CM50 ceiling microphones go on one AVBridge, we confirm that at order time. Whether the room has a switch with EEE off. The AVBridge box contents, we confirm those at order time.
The AP08 DSP processor 1303097 where 16×16 Dante channels, eight AEC channels and power for three audio devices are needed. The AV ONE range with the EN300 and DE300 where image is to travel between rooms over the IP network. A video bar with built-in audio where one device is enough for the room.
The „Good fit“ box follows the manufacturer's positioning of these models, the „Check first“ and „Consider another model“ boxes come from the atlantis team's practice.
Recommended
The processor hands the room's image and audio to the host over USB, so it serves any platform the host runs. The AVHub has a USB-B 3.0 port and a Codec port for this, the AVBridge converts both audio and video to USB.
USB
any platform on the host
Microsoft Teams Rooms
On the AVHub the camera layout is set from the Yealink plugin before a Microsoft Teams Rooms meeting and during it. Multi-Camera IntelliFocus and Multi-Stream IntelliFrame on the device go with it.
MTR plugin
Multi-Camera IntelliFocus
Networked audio
The AVBridge has 4×4 Dante channels and the AES67 protocol, 48 kHz sampling at 24 bit and a 97 dB dynamic range. Alongside that a matrix mixer for routing and PEQ for tuning the room acoustics.
Dante 4×4
AES67
Parameter | AVHub | AVBridge |
|---|---|---|
Cameras | up to 9× UVC84 or UVC86 | extends the camera signal to the host |
Tabletop microphone arrays | up to 8× VCM34, VCM35 or VCM38 | audio arrives over Dante or analogue |
Ceiling units | up to 4× CM20 or CS10 | up to 4× CM20, or the CM50 ceiling panel |
Speakers | up to 4× MSpeaker II | Yealink and third-party speakers, over Dante or analogue |
Smart functions | Multi-Camera IntelliFocus, Multi-Stream IntelliFrame, divisible room | matrix mixer, PEQ, one-touch deployment |
Parameter | AVHub | AVBridge |
|---|---|---|
Networked audio | peripherals over a network cable with PoE power | Dante with 4 input and 4 output channels, AES67 protocol |
Sampling and bit depth | audio arrives from the connected peripherals | Dante 48 kHz / 24 bit, USB 48 and 16 kHz at 16 and 24 bit |
Frequency range | audio arrives from the connected peripherals | 100 Hz to 20 kHz on Dante and on analogue |
Distortion and dynamics | audio arrives from the connected peripherals | THD+N ≤ 0.1 % on Dante, 97 dB dynamic range |
Analogue ports | 1× RCA in and out, 1× 6.3 mm line in, 1× 6.3 mm line out | 1× 3-pin Phoenix input, 1× 5-pin Phoenix output |
Audio shaping | audio and video processing for several peripherals at once | matrix mixer for routing, PEQ for tuning the room |
Parameter | AVHub | AVBridge |
|---|---|---|
Ports | 2× USB-A 2.0, 1× USB-B 3.0, 1× Codec, 7× VCH (RJ-45), 1× RCA in and out, 1× 6.3 mm line in, 1× 6.3 mm line out, 1× power | RJ45, Cat5e cabling or better, shielded cable recommended |
Power | adapter, input 100 to 240 V at 50/60 Hz and 1.5 A, output 48 V / 2 A, that is 96 W | PoE over the network cable |
Consumption | 80 W PoE budget for the connected peripherals | 13 W at full load, 8 W with no load |
Cable lengths in the box | 2 m power cord, 1.8 m DC cable, 2.5 m USB cable, 7.5 m network cable | we confirm the box contents at order time |
Dimensions and weight | net weight 2.31 kg, gross 2.62 kg, box 382 × 215 × 120 mm | 150 × 100 × 28 mm, 315 g, PC+ABS material |
Operating conditions | placed in a rack or next to the host in the room | 0 to 40 °C, humidity 0 to 95 % |
AVHub processor
Power adapter
2.5 m USB cable
7.5 m network cable
Quick Start Guide
We confirm the AVBridge box contents at order time
Cameras, microphones and speakers, these are ordered separately
The host computer or the system's compute unit
A PoE switch where the AVHub ports or power budget run out
AMS extended warranty
CM20 ceiling microphone1303095
The AVHub takes up to four CM20 or CS10 ceiling units, the AVBridge up to four CM20 microphones.
CS10 ceiling speaker1303094
A speaker powered from PoE+ with a 24 W rated draw. Count it into the AVHub power budget.
VCM35 tabletop microphone array1303144
The AVHub takes up to eight VCM34, VCM35 or VCM38 microphone arrays. We confirm the placement of the VCM35 Pro 1303322 against the AVHub at order time.
MSpeaker II sound bar1306029
Up to four MSpeaker II units pair with the AVHub, that is sound for a hall without a separate amplifier.
PSU-48V/2A power adapter330000027001
A spare adapter for the AVHub, listed in our range for the RCH40 and A40 as well. The AVHub box does include an adapter.
AMS extended warranty, 1 to 3 years510102001089 and on
We carry AMS for the AVHub and for the AVBridge, the codes are in the Warranty section.
Model | Type | Audio | Intended for |
|---|---|---|---|
AVHub ◂ this page | audio and video processor, 7 VCH ports | peripherals over PoE, analogue in and out | large and extra-large hall, up to 9 cameras |
AVBridge | audio box and A/V signal extender | Dante 4×4, AES67, Phoenix analogue | medium and large room, ceiling microphones |
AP08 | DSP processor of the SkySound Pro Audio range | Dante 16×16, analogue 4×4, 8 AEC channels | designed installs and divisible halls |
EN300 and DE300 | AV over IP encoder and decoder | native Dante AV-A on the EN300 | image and audio over IP between rooms |
CT200 and CT300 | room controllers | they control devices, they do not process audio | management and routing in a ProAV install |
Who runs the meeting: the processor is a peripheral, the room needs a host computer or a compute unit
Which model: the AVHub for more cameras and powered peripherals, the AVBridge for Dante and signal extension
Peripheral count: the AVHub takes up to 9 cameras, 8 microphone arrays, 4 ceiling units and 4 sound bars
Power budget: the AVHub gives peripherals 80 W, one CS10 draws 24 W rated
Topology: a star with no daisy chain, EEE switched off on the switch
Host firmware: the AVBridge with the A40 from 289.320.0.70, with the A50 from 323.320.0.34, with the MeetingBoard Pro from 331.320.0.30
Cabling: Cat5e or better on the AVBridge, shielded cable recommended, we confirm the box contents at order time
Support: the AMS extended warranty, order it with the device
The atlantis team helps with every point. From system design and the power budget through wiring and configuration to user training and handover of the documentation. On the AVBridge we also confirm the box contents at order time, so you do not promise the customer items that are not in it.
Management follows the platform: in native mode the device is managed from the administration of the platform the room runs.
Yealink Management Cloud Service (YMCS): cloud management of Yealink devices, that is bulk firmware updates, status monitoring and alerts. Support and the scope of management differ by model and licence, so check both with us for the specific device and system.
atlantis is a direct importer and distributor, and we deliver projects through a network of specialist partners. The services below are therefore offered to the partner, not to the end customer. The partner sets the scope. On one project we take on the whole delivery, on another we cover just the part the partner currently lacks capacity or specialisation for, and on a third the partner manages alone and uses us only for a consultation.
Before the decision: a consultation on choosing the system and a comparison of the suitable options. The recommendation is built on the size and the character of the room, that is light, acoustics, shape, seating layout and furnishing, then on headcount and on how meetings are actually run there. We offer a live demonstration at our premises, which the partner can bring their customer to, and where it is warranted a test installation, that is a proof of concept.
Delivery and installation: transport, professional mounting and the work that goes with it, that is cabling, installation material, brackets and room alterations. We handle the installation in full, or support the partner's own team where needed.
Network readiness and security: we advise on preparing the network for the demands of two-way real-time video, that is throughput, latency and traffic prioritisation, and on securing the communication.
Configuration and integration: setting up the communication platform and the room account, connecting to the network, and advice on linking and integrating third-party software and hardware.
Training and documentation: training prepared to match the user's role, that is one thing for room users and another for administrators, plus preparation of both project and user documentation.
Service and support after the sale: our certified team in Czech, available to the partner throughout the equipment's life. We handle a warranty claim with the manufacturer on the partner's behalf.
The standard warranty on Yealink products is 24 months. On top of it we offer two different things that are easy to confuse.
Extended warranty
Extends the warranty period, that is how long the customer is entitled to repair or replacement of a faulty unit. The abbreviation stands for Assurance Maintenance Services.
1 to 3 years
Service programme
Changes how the service is delivered. It covers priority support with escalation during business hours, advance hardware replacement with the unit dispatched the next business day from local European service stock, warranty service aligned with the licence period, the YMCS-Room-Professional package, software updates and access to the Yealink online support centre.
2 to 5 years
Take note
A customer buys one of them, not both. AMS is enough where a longer warranty is all that is needed, PrimeCare is the choice where room downtime is expensive and the customer needs fast replacement and management. For video products the cap on total warranty is five years, and AMS is bought consecutively, so it must not leave a gap at the end of the existing warranty.
one programme
five-year cap
no gap
Order codes. AMS for one to three years: AVHub 510102001089, 510102001090 and 510102001091, AVBridge 510102001079, 510102001080 and 510102001081. PrimeCare is ordered by room size class against the whole system, not against the processor on its own, so check the placement with us for the specific project.
The Yealink AVHub and AVBridge are AV processors, that is the stage between the room's peripherals and the host computer. They gather cameras, microphones and speakers and hand them to the host over USB. The meeting is always run by the host; the processor handles image and audio.
The Yealink AVHub serves up to nine cameras, UVC84 or UVC86, up to eight VCM34, VCM35 or VCM38 microphone arrays, up to four CM20 or CS10 ceiling units and up to four MSpeaker II sound bars. The limit is not only the port count but also the 80 W power budget for the connected peripherals.
The Yealink AVHub has two USB-A 2.0 ports, one USB-B 3.0, one Codec port, seven VCH ports on RJ-45, one RCA in and out, one 6.3 mm line in and one 6.3 mm line out and a power port. It is powered by an adapter with a 100 to 240 V input and a 48 V / 2 A output.
The Yealink AVBridge has 4 input and 4 output Dante channels and the AES67 protocol, 48 kHz sampling at 24 bit, a frequency range of 100 Hz to 20 kHz and a 97 dB dynamic range. It also has an analogue input on a three-pin Phoenix connector and an analogue output on a five-pin connector.
The Yealink AVBridge works with the MeetingBar A40 from firmware 289.320.0.70, with the MeetingBar A50 from firmware 323.320.0.34 and with the MeetingBoard Pro from firmware 331.320.0.30. With the MeetingBar A10, A25 and A30 and with the MeetingBoard C EDLA the combination does not work.
The Yealink AVHub box holds the processor, a power adapter, a 2.5 m USB cable, a 7.5 m network cable and a Quick Start Guide. The power cord is 2 m and the DC cable 1.8 m. We confirm the AVBridge box contents at order time; its shipping box measures 191 × 125 × 88 mm and weighs 616 grams gross.
No attachments available.
Not sure what to choose?
We're happy to help you choose!
Every business day from 8:00 to 17:00