XPO / KROSS / KAMELEO - Mount for 1 screen - VESA

ERARD PRO, XPO, KROSS and KAMELEO accessories — screen mounts, video bar brackets and boxes for codecs and peripherals for the profile of the aluminium column. Besides POLY devices, the video bar brackets also carry Yealink, Barco ClickShare, Neat, Crestron, Yamaha, Logitech, Nureva and others.

All items mount on the column profile and are listed for the XPO, KROSS and KAMELEO ranges. For HARMONY also 510083, 602501, 602505 and the video bar brackets 600030, 600045, 600046 and 600047 are listed. The restriction to 2000XXL columns applies only to the dual screen mount 602506, which is not in this group.

Key features

• Mount 510083 carries one screen up to 60 kg with a VESA pattern from 200 × 100 to 400 × 400, 602501 up to 70 kg with a pattern up to 800 × 500

• Mount 602505 carries a large screen up to 120 kg on a 1504 mm bottom support bar, 602504 a portrait screen up to 120 kg

• The screen mounts are fixed, with no tilt and no swivel, with an anti-drop safety system

• The video bar brackets split by position, 600045 and 600049 above the screen, the others below it or at any height on the column

• Bracket 600037 covers twenty devices, among them Barco ClickShare Bar Core and Bar Pro, Neat Bar Gen 2 and Bar Pro, Yealink A20, A30 and UVC40

• Dedicated brackets for Logitech Rally Plus, Rally Bar, MeetUp, Yamaha CS-700, Crestron and Nureva

• Boxes and racks on the back of the column hide the codec, players, sockets and power supplies, the cable rewinder tidies excess cable

• Epoxy painted steel, indoor use, 10 year warranty

Strengths and limits

Which installation

The “Good fit” box is based on the technical parameters of the items, the “Check” and “Consider another model” boxes on the practice of the atlantis team.

Parameters and compatibility

A dash means we do not have the figure, code 600048 could not be found in the current catalogue. For 602505 the documentation gives a maximum pattern of 1700 × 800, but the list of supported patterns ends at 1300 × 800, a pattern above 1300 × 800 will be confirmed with the order. Kit 602508 extends 602504 to a 600 × 900 pattern, the kit description states 800 × 900, the target pattern will be confirmed with the order. The load rating of the video bar brackets and the item weights will be confirmed with the order.

In the box

Order with it

A quote always carries the column and the screen mount as two items, the video bar bracket and the boxes are optional. The assembly load rating is the lower of the column rating and the mount rating, with 510083 it is 60 kg even on a column that carries 120 kg.

Where the group sits

What to check before ordering and installation

1. VESA pattern: 510083 up to 400 × 400, 510080 up to 600 × 600, 602501 up to 800 × 500, large screens 602505, portrait 602504

2. Screen weight: from the data sheet, the assembly ceiling is the lower of column and mount

3. Video bar model: the exact designation against the list of supported devices, not just the brand

4. Video bar position: from our offer only 600045 goes above the screen, and 600049 for Nureva

5. Code 600048: availability will be confirmed with the order, do not put it in a quote without confirmation

6. Screen orientation: portrait only with 602504, if needed with the extension kit 602508

7. Electronics behind the screen: number and dimensions of codecs, players and power supplies against the boxes and racks

8. Cabling: 600045 has integrated cable management, the others route inside the column, the rewinder 180006 tidies the excess

The atlantis team helps with every point. From checking the column and mount pair in the quote through matching the video bar with the right code to installation, commissioning and handover of documentation.

Installation design and services

• The weakest link sets the load rating of the assembly: in a stand plus screen mount plus shelf assembly, the lowest of the stated load ratings always applies. Check the screen weight in its own datasheet, not from the diagonal.

• Check VESA before ordering: the stated range is the maximum pattern, not a guarantee that the screen fits. On large formats and on screens with curved or irregular backs, verify both the pattern and the thickness in advance.

• The wall type decides the fixing hardware: plasterboard, masonry and concrete each need different anchors. On part of the range the wall screw set is not in the box and the fixing hardware is chosen on site to suit the wall.

• Cabling and service access belong in the design, not on the installation day: cable routing inside the column, the wall penetration and access to the back of the screen have to be in the room layout before anyone drills.

atlantis services for partners

atlantis is a direct importer and distributor, and we supply through a network of specialist partners. The services below are therefore offered to the partner, not to the end customer. The partner sets the scope. On one project we are only the source of the parts and a consultation, on another we design the whole run and oversee the work, on a third we take on the installation in full.

• Choosing the kit by camera and distance: we pick the kit from the camera or codec the customer already has, how far it sits from the equipment and which interface is used, that is HDMI, USB or fibre. We also say what to do about a device that is not on the compatibility list.

• Route design and building readiness: we go through the cable run with the partner, the category and length of the cabling, the number and position of the boxes, the wall penetration and the space in the rack. On in-wall mounts the opening size and cavity depth are what matters, and we settle those before the order, not on site.

• Completing the order: we match the kit with the right cables, power supply and mount, because that is exactly where jobs are left unfinished. We check that the pieces fit each other by connector and by length, and that nothing the partner needs on day one is missing from the delivery.

• Installation and commissioning: we handle the professional installation in full, or support the partner's own team where needed. Once it is wired we test the link at full distance, that is picture, camera control and power, before the ceiling is closed.

• Integration with the customer's environment: we advise on connecting to the codec, to the control system and to third-party software and hardware, and on how the kit behaves when the camera is swapped for a different model.

• Service, spare parts and warranty: our certified team in Czech, available to the partner throughout the equipment's life. We keep track of the replacement modules and parts by range and handle a warranty claim with the manufacturer on the partner's behalf.

Warranty

The ERARD PRO range is passive mechanics, so the warranty covers the structure, the welds, the moving parts and the finish. The warranty term is not the same across the brand and for a given item it is what is stated below.

Frequently asked questions