POP-OUT - Adaptation kit VESA 600x400 for POP-OUT

ERARD PRO POP-OUT accessories — steel adapter rails that widen the fixing pattern of a video wall mount to a larger VESA than the mount has natively, and an omega interface piece for mounting the bracket on XPO stands.

The range carries two designations, POP-OUT and PUSH-PULL. They are identical products under the same references, and the adapters for size XXL appear in the documentation as PUSH-PULL XXL.

Key features

• A steel rail with epoxy paint, fitted between the rails of the mount and the back of the screen

• It widens the fixing pattern to a larger VESA than the mount has natively, it does not change the load rating

• Every adapter belongs to one specific POP-OUT size class and is not interchangeable between classes

• The order ratio is one adapter set per screen, the same as for the mount

• Adapter 620201 for sizes L and XL takes a screen up to 80 kg, the rail weighs 1.00 kg

• Set 620011 covers two patterns under one code, 800 × 400 as well as 800 × 500

• Portrait and landscape installation on adapter 620201

• Omega adapter 620206 is not a VESA adapter, it is an interface piece between an XPO stand and a wall mount

Strengths and limits

Which installation

The “Suitable” field follows from the technical parameters of the group, the “Verify” and “Consider another model” fields from the practice of the atlantis team.

Types of adapter

Patterns and compatibility

The documented weight is 1.00 kg on adapter 620201, whose package measures 620 mm × 25 mm × 25 mm. The weight, the dimensions and the number of pieces per set on references 620001, 620011, 620012, 620013 and 620206 we confirm with the order.

In the box

Order with it

Which pattern for which size

What to verify before ordering and installing

1. Size class of the mount: the adapter is picked for it, not for the pattern on its own

2. Native VESA pattern of the screen: only that tells you whether an adapter is needed at all

3. Load rating of the assembly: it stays at the level of the mount size class, an adapter does not raise it

4. Number of sets: one adapter set for every screen in the video wall

5. Size XXL: adapters 620011, 620012, 620013 and 620208 only together with mount 620301

6. Sizes M and Mini: size M takes 620210, set 620103 for Mini is not in the price list, we order it on request

7. An assembly on XPO stands: the structural variant of the stand and the 175 mm added depth of the omega adapter

8. Cabling after the pattern is widened: the cable slack still has to allow the screen to come fully out

The atlantis team helps with every point. From checking the video wall bill of materials through adding references outside the price list to installation, alignment and handover of the documentation.

Installation design and services

• The weakest link sets the load rating of the assembly: in a stand plus screen mount plus shelf assembly, the lowest of the stated load ratings always applies. Check the screen weight in its own datasheet, not from the diagonal.

• Check VESA before ordering: the stated range is the maximum pattern, not a guarantee that the screen fits. On large formats and on screens with curved or irregular backs, verify both the pattern and the thickness in advance.

• The wall type decides the fixing hardware: plasterboard, masonry and concrete each need different anchors. On part of the range the wall screw set is not in the box and the fixing hardware is chosen on site to suit the wall.

• Cabling and service access belong in the design, not on the installation day: cable routing inside the column, the wall penetration and access to the back of the screen have to be in the room layout before anyone drills.

atlantis services for partners

atlantis is a direct importer and distributor, and we supply through a network of specialist partners. The services below are therefore offered to the partner, not to the end customer. The partner sets the scope. On one project we are only the source of the parts and a consultation, on another we design the whole run and oversee the work, on a third we take on the installation in full.

• Choosing the kit by camera and distance: we pick the kit from the camera or codec the customer already has, how far it sits from the equipment and which interface is used, that is HDMI, USB or fibre. We also say what to do about a device that is not on the compatibility list.

• Route design and building readiness: we go through the cable run with the partner, the category and length of the cabling, the number and position of the boxes, the wall penetration and the space in the rack. On in-wall mounts the opening size and cavity depth are what matters, and we settle those before the order, not on site.

• Completing the order: we match the kit with the right cables, power supply and mount, because that is exactly where jobs are left unfinished. We check that the pieces fit each other by connector and by length, and that nothing the partner needs on day one is missing from the delivery.

• Installation and commissioning: we handle the professional installation in full, or support the partner's own team where needed. Once it is wired we test the link at full distance, that is picture, camera control and power, before the ceiling is closed.

• Integration with the customer's environment: we advise on connecting to the codec, to the control system and to third-party software and hardware, and on how the kit behaves when the camera is swapped for a different model.

• Service, spare parts and warranty: our certified team in Czech, available to the partner throughout the equipment's life. We keep track of the replacement modules and parts by range and handle a warranty claim with the manufacturer on the partner's behalf.

Warranty

The ERARD PRO range is passive mechanics, so the warranty covers the structure, the welds, the moving parts and the finish. The warranty term is not the same across the brand and for a given item it is what is stated below.

Frequently asked questions