KAMELEO - Socle mobile - Coloris :TITANE TEXTURE

ERARD PRO KAMELEO — modular AV furniture for huddle rooms and small meeting rooms, a column with internal cable routing complemented by closed cabinet modules, in four installation modes. It is ordered module by module and the mandatory base of every assembly is a base plus the 510030 column. A screen mount is in none of the 44 KAMELEO references, it is ordered separately as ref. 510083 or 602501.

The bottom unit and the TopBOX are always ordered as a pair, the structure and a front panel to go with it. A structure on its own has no face and a face on its own cannot be used without a structure. None of the 44 references is a screen mount, that is ordered separately as ref. 510083 or 602501 from the XPO, KROSS and KAMELEO accessories family.

Key features

• A modular system for huddle rooms and collaborative spaces, wood and steel with epoxy paint

• Four installation modes from one system: mobile, freestanding, leaning on the wall and wall anchored

• Load rating 70 kg, one screen up to 75 inches or two screens of 65 inches

• Cable routing inside the column profile and inside the bottom unit

• A perforated sheet in the bottom unit for fixing peripherals

• Cooling by natural convection, with no fan

• Four structure colours and eight front panel finishes, chosen independently

• Cut-outs for front connectivity can be ordered on the TopBOX module only

Strengths and limits

Which installation

The “Suitable” field follows from the technical parameters of the system, the “Verify” and “Consider another model” fields from the practice of the atlantis team.

Installation modes

Dimensions and load

The 510030 column is 1200 mm long and made of anodised aluminium. The VESA range is set by the chosen screen mount, that is ref. 510083 with a VESA 200 > 400 pattern, or ref. 602501 with a VESA 200 > 800 × 400 pattern. The product is not delivered assembled, assembly takes 30 minutes.

In the box

Order with it

Where the range sits

What to verify before ordering and installing

1. Installation mode: mobile, freestanding, leaning on the wall, or anchored, which gives the base code

2. Footprint and height: 730 × 575 mm or 730 × 423 mm, height 1761 mm or 1832 mm against the room layout

3. The column in the order: ref. 510030 is mandatory and will not stand up without a base

4. The screen mount: ref. 510083 or 602501, there is no mount in the KAMELEO family

5. The screen: weight up to 70 kg and the VESA pattern from the datasheet, not from the diagonal

6. Pairs on the cabinets: the bottom unit and the TopBOX always as a structure plus a front panel

7. The RAL shade: on ref. 510053 and 510073 the perforated metal shade is specified with the order

8. Anchoring and technology: a load-bearing wall and anchors on the anchored and leaning versions, passive cooling for the technology

The atlantis team helps with every point. From putting the configuration together module by module through matching the mount to the specific screen to installation, commissioning and handover of the documentation.

Installation design and services

• The weakest link sets the load rating of the assembly: in a stand plus screen mount plus shelf assembly, the lowest of the stated load ratings always applies. Check the screen weight in its own datasheet, not from the diagonal.

• Check VESA before ordering: the stated range is the maximum pattern, not a guarantee that the screen fits. On large formats and on screens with curved or irregular backs, verify both the pattern and the thickness in advance.

• The wall type decides the fixing hardware: plasterboard, masonry and concrete each need different anchors. On part of the range the wall screw set is not in the box and the fixing hardware is chosen on site to suit the wall.

• Cabling and service access belong in the design, not on the installation day: cable routing inside the column, the wall penetration and access to the back of the screen have to be in the room layout before anyone drills.

atlantis services for partners

atlantis is a direct importer and distributor, and we supply through a network of specialist partners. The services below are therefore offered to the partner, not to the end customer. The partner sets the scope. On one project we are only the source of the parts and a consultation, on another we design the whole run and oversee the work, on a third we take on the installation in full.

• Choosing the kit by camera and distance: we pick the kit from the camera or codec the customer already has, how far it sits from the equipment and which interface is used, that is HDMI, USB or fibre. We also say what to do about a device that is not on the compatibility list.

• Route design and building readiness: we go through the cable run with the partner, the category and length of the cabling, the number and position of the boxes, the wall penetration and the space in the rack. On in-wall mounts the opening size and cavity depth are what matters, and we settle those before the order, not on site.

• Completing the order: we match the kit with the right cables, power supply and mount, because that is exactly where jobs are left unfinished. We check that the pieces fit each other by connector and by length, and that nothing the partner needs on day one is missing from the delivery.

• Installation and commissioning: we handle the professional installation in full, or support the partner's own team where needed. Once it is wired we test the link at full distance, that is picture, camera control and power, before the ceiling is closed.

• Integration with the customer's environment: we advise on connecting to the codec, to the control system and to third-party software and hardware, and on how the kit behaves when the camera is swapped for a different model.

• Service, spare parts and warranty: our certified team in Czech, available to the partner throughout the equipment's life. We keep track of the replacement modules and parts by range and handle a warranty claim with the manufacturer on the partner's behalf.

Warranty

The ERARD PRO range is passive mechanics, so the warranty covers the structure, the welds, the moving parts and the finish. The warranty term is not the same across the brand and for a given item it is what is stated below.

Frequently asked questions