Axeos XENON WIDE single/dual - white color

Axeos XENON WIDE is a stand for large 65 to 100-inch panels with a low screen axis, a magnetic wooden door in the column and a 3U technology holder inside. It carries up to 130 kg.

Key features

• One screen 65 to 86" with an 85 kg load, or 75 to 100" with a 130 kg load.

• Two screens 52 to 65" at 40 kg each, or 70 to 90" at 60 kg each.

• Screen axis 1140 to 1450 mm, lower than on the XENON range, which keeps large panels at eye level.

• The column holds a 3U codec or player holder SCUV12_3U and above the screen a universal camera holder SCUV3.

• Brushed stainless steel column with a magnetic wooden door, back in eco-friendly acrylic glass.

• Steel base with a brushed stainless steel casing, on Teflon pads.

Description

A low screen axis for large panels

The larger the panel, the lower its centre has to be so that people at the table do not look up. The XENON WIDE holds the axis within 1140 to 1450 mm, 260 mm lower than the XENON range. On a 98-inch panel that is the difference between a picture at eye level and one above people's heads.

Technology in the column, not on a shelf

Instead of a shelf under the screen the XENON WIDE carries a 3U holder inside the column. A codec, a player or a switch disappears behind the magnetic wooden door and the stand stays clean from behind too.

The camera above the screen

On this range the camera goes on the universal SCUV3 holder above the screen. On dual screen kits the SCUV3_2 adapter is added so that the camera sits between the two panels.

Strengths and limits

Where it fits

Large meeting rooms with an 86 to 100-inch panel

A low screen axis and a 130 kg load make the XENON WIDE the stand for panels that would hang too high on an ordinary one.

Representative spaces

The combination of brushed stainless steel and a wooden door is meant for places where the stand is seen and has to fit the interior.

Two screens side by side

The kits XENONWD5265VCPACK and XENONWD7090VCPACK carry two panels, the larger up to 90 inches at 60 kg each.

Order variants

The _BSS suffix marks brushed stainless steel, _PS painted steel. We confirm the painted finish and the white variant XENONWIDE/WHITE with your order, because it is made as a finish option.

Technical specifications

In the box

Do not forget to order

Variants and products in the range

What to check before ordering and installing

1. Panel size: 65 to 86 inches with an 85 kg limit, or 75 to 100 inches with a 130 kg limit

2. VESA: on a 100-inch panel check the grid, the stand takes up to 1000 x 600 mm

3. Axis height: 1140 to 1450 mm, check it against the table height and the row spacing

4. Technology: 3U fits in the column, a larger codec or switch has to be placed elsewhere

5. Finish: brushed stainless steel as standard, painted and white as options

6. Floor and delivery: 95 to 120 kg plus the panel, check the route to the room

7. Two screens: the SCUV3_2 adapter for the camera between the panels

The atlantis team will help with every point.

Management and services

• No software, no management: Axeos stands, mounts and furniture are mechanical structures with no firmware and no central management. What is managed is the technology mounted on them.

• Custom finishes: Axeos manufactures in France and supplies most ranges in other finishes, with custom text or with a modified plate. We confirm the lead time and price of such a change with your order.

atlantis services for partners

atlantis is a direct importer and distributor, and we supply through a network of specialist partners. The services below are therefore offered to the partner, not to the end customer. The partner sets the scope. On one project we are only the source of the parts and a consultation, on another we design the whole run and oversee the work, on a third we take on the installation in full.

• Choosing the kit by camera and distance: we pick the kit from the camera or codec the customer already has, how far it sits from the equipment and which interface is used, that is HDMI, USB or fibre. We also say what to do about a device that is not on the compatibility list.

• Route design and building readiness: we go through the cable run with the partner, the category and length of the cabling, the number and position of the boxes, the wall penetration and the space in the rack. On in-wall mounts the opening size and cavity depth are what matters, and we settle those before the order, not on site.

• Completing the order: we match the kit with the right cables, power supply and mount, because that is exactly where jobs are left unfinished. We check that the pieces fit each other by connector and by length, and that nothing the partner needs on day one is missing from the delivery.

• Installation and commissioning: we handle the professional installation in full, or support the partner's own team where needed. Once it is wired we test the link at full distance, that is picture, camera control and power, before the ceiling is closed.

• Integration with the customer's environment: we advise on connecting to the codec, to the control system and to third-party software and hardware, and on how the kit behaves when the camera is swapped for a different model.

• Service, spare parts and warranty: our certified team in Czech, available to the partner throughout the equipment's life. We keep track of the replacement modules and parts by range and handle a warranty claim with the manufacturer on the partner's behalf.

Warranty

The manufacturer warranty on this product is 3 years.

Frequently asked questions