Axeos XENON single - 1 monitor 60"- 90"

Axeos XENON is a stand for large panels from 60 to 100 inches, with a load capacity up to 130 kg and a camera shelf at 960 mm. For rooms where the screen height changes there is the XENON LIFT version with a motorised lift.

Key features

• One screen 60 to 90" with an 85 kg load, or 75 to 100" with a 130 kg load.

• Dual screen kits 52 to 65" at 40 kg each and 70 to 90" at 60 kg each.

• VESA up to 800 x 400 mm, on the 75 to 100-inch size up to 1000 x 600 mm.

• Screen axis 1400 to 1820 mm, camera shelf fixed at 960 mm.

• The XENON LIFT version lifts 1400 to 1900 mm, load 85 kg, and 105 kg on the 75 to 100-inch size.

• Steel base with a brushed stainless steel casing on Teflon pads, column in brushed stainless steel.

Description

Load capacity for panels that fit nowhere else

The 130 kg on the 75 to 100-inch size is the highest load in the whole Axeos range, shared with the XENON WIDE and the STILIX. For 98 and 100-inch panels weighing 70 kg and more it is the way to put them on a stand rather than on a wall.

A camera shelf at a fixed height

Unlike the EKINOX and the BOXER, the XENON carries the camera shelf at a fixed height of 960 mm. The camera therefore sits above a standard conference table and the height is not negotiated on site.

A motorised lift as a version of its own

The XENON LIFT adds an electric lift over the 1400 to 1900 mm range. It suits rooms where the screen is watched by people both seated and standing, typically training and teaching spaces.

Strengths and limits

Where it fits

Large meeting rooms and representative halls

One 75 to 100-inch screen with a 130 kg load covers professional panels with a metal frame too. The code XENONS75100VCPACK is the one for this class.

Two screens for the picture and the content

The kits XENOND5265VCPACK and XENOND7090VCPACK carry two screens, the latter up to 90 inches at 60 kg each.

Training and teaching spaces

The XENON LIFT with its electric lift over 1400 to 1900 mm lets the screen be levelled for a seated and a standing audience alike.

Order variants

The code XENON LIFT contains a space, which is how the manufacturer carries it too. Quote it exactly on the order and we will confirm it. The fully black and fully white finishes are carried as XENON/FULLBLACK and XENON/FULLWHITE.

Technical specifications

In the box

Do not forget to order

Variants and products in the range

What to check before ordering and installing

1. Panel size and weight: up to 90 inches the limit is 85 kg, on 75 to 100 inches it is 130 kg

2. VESA: on 100-inch panels check the grid, the stand takes up to 1000 x 600 mm

3. Fixed or motorised height: the LIFT travels 1400 to 1900 mm, on the large version the load is 105 kg

4. Floor: the stand weighs 130 to 160 kg plus the panel, check the floor loading and the route to the room

5. Pads or casters: pads are the standard

6. Camera height: the shelf is fixed at 960 mm

7. Installation: large panels take two to three people, allow for it in the schedule

The atlantis team will help with every point.

Management and services

• No software, no management: Axeos stands, mounts and furniture are mechanical structures with no firmware and no central management. What is managed is the technology mounted on them.

• Custom finishes: Axeos manufactures in France and supplies most ranges in other finishes, with custom text or with a modified plate. We confirm the lead time and price of such a change with your order.

atlantis services for partners

atlantis is a direct importer and distributor, and we supply through a network of specialist partners. The services below are therefore offered to the partner, not to the end customer. The partner sets the scope. On one project we are only the source of the parts and a consultation, on another we design the whole run and oversee the work, on a third we take on the installation in full.

• Choosing the kit by camera and distance: we pick the kit from the camera or codec the customer already has, how far it sits from the equipment and which interface is used, that is HDMI, USB or fibre. We also say what to do about a device that is not on the compatibility list.

• Route design and building readiness: we go through the cable run with the partner, the category and length of the cabling, the number and position of the boxes, the wall penetration and the space in the rack. On in-wall mounts the opening size and cavity depth are what matters, and we settle those before the order, not on site.

• Completing the order: we match the kit with the right cables, power supply and mount, because that is exactly where jobs are left unfinished. We check that the pieces fit each other by connector and by length, and that nothing the partner needs on day one is missing from the delivery.

• Installation and commissioning: we handle the professional installation in full, or support the partner's own team where needed. Once it is wired we test the link at full distance, that is picture, camera control and power, before the ceiling is closed.

• Integration with the customer's environment: we advise on connecting to the codec, to the control system and to third-party software and hardware, and on how the kit behaves when the camera is swapped for a different model.

• Service, spare parts and warranty: our certified team in Czech, available to the partner throughout the equipment's life. We keep track of the replacement modules and parts by range and handle a warranty claim with the manufacturer on the partner's behalf.

Warranty

The manufacturer warranty on this product is 3 years.

Frequently asked questions