Axeos STILIX single - floor/wall stand

Axeos STILIX is a floor to wall assembly, a stand that carries the screen from the floor and leans against the wall. It takes one 55 to 100-inch screen or two 52 to 75-inch screens and has a notch for the skirting board.

Key features

• One screen 55 to 86" with an 85 kg load, or 75 to 100" with a 130 kg load.

• The dual screen kit 52 to 75" with a 30 kg load per screen.

• Screen axis 1330 to 1740 mm, adjustable over 410 mm.

• Painted steel structure in a white finish, weight from 30 kg.

• A notch for the skirting board 211 mm high and 20 mm deep, so the assembly sits flush to the wall.

• The kit includes the camera shelf SCUV3_R1 and the technology holder SCUV12, and on two screens the 1U holder SCUV12_1U.

Description

The load capacity of a stand without demands on the wall

The STILIX transfers the weight of the screen into the floor and the wall only stabilises it. In a plasterboard or glass partition, where a wall mount for a 100-inch panel is out of the question, it is the simplest answer.

A structure that does not take up the room

The assembly stands against the wall, has no base reaching into the room and weighs from 30 kg. Against mobile stands weighing 55 to 160 kg that is a marked difference in both delivery and installation.

A notch for the skirting board

The plinth carries a 211 x 20 mm notch for the skirting board, so it sits flush to the wall even where the skirting runs the whole perimeter. With floor to wall assemblies this is a frequent reason why another solution cannot be used.

Strengths and limits

Where it fits

Meeting rooms with a light partition

Where the partition will not take a 100-inch panel, the STILIX carries the weight and the wall only stabilises it. The code STILIXS75100VCPACK is for the largest panels.

Rooms with skirting all around

The 211 x 20 mm notch lets the assembly sit flush to the wall without removing the skirting.

Two screens against a wall

The kit STILIXD5275VCPACK carries two 52 to 75-inch panels at 30 kg each, with a 1U holder in the column.

Order variants

The black finish is carried as STILIX/BLACK. We confirm what the DS kits contain with your order, they differ from the VCPACK kits in the accessories included. We carry both STILIXWS6580VCPACK and STILIXWS6586VCPACK, they differ in the screen size range, and we confirm the code with the actual order.

Technical specifications

In the box

Do not forget to order

Variants and products in the range

What to check before ordering and installing

1. The wall: the assembly leans on it, check that it is flat and what it is made of

2. Skirting board: the notch is 211 mm high and 20 mm deep

3. Panel size and weight: 85 kg up to 86 inches, 130 kg on 75 to 100 inches

4. Two screens: a 30 kg limit per screen

5. Finish: white as standard, black as an option

6. Cabling: a socket behind the assembly, the column carries the technology holder

7. Axis height: 1330 to 1740 mm against the table height and the row spacing

The atlantis team will help with every point.

Management and services

• No software, no management: Axeos stands, mounts and furniture are mechanical structures with no firmware and no central management. What is managed is the technology mounted on them.

• Custom finishes: Axeos manufactures in France and supplies most ranges in other finishes, with custom text or with a modified plate. We confirm the lead time and price of such a change with your order.

atlantis services for partners

atlantis is a direct importer and distributor, and we supply through a network of specialist partners. The services below are therefore offered to the partner, not to the end customer. The partner sets the scope. On one project we are only the source of the parts and a consultation, on another we design the whole run and oversee the work, on a third we take on the installation in full.

• Choosing the kit by camera and distance: we pick the kit from the camera or codec the customer already has, how far it sits from the equipment and which interface is used, that is HDMI, USB or fibre. We also say what to do about a device that is not on the compatibility list.

• Route design and building readiness: we go through the cable run with the partner, the category and length of the cabling, the number and position of the boxes, the wall penetration and the space in the rack. On in-wall mounts the opening size and cavity depth are what matters, and we settle those before the order, not on site.

• Completing the order: we match the kit with the right cables, power supply and mount, because that is exactly where jobs are left unfinished. We check that the pieces fit each other by connector and by length, and that nothing the partner needs on day one is missing from the delivery.

• Installation and commissioning: we handle the professional installation in full, or support the partner's own team where needed. Once it is wired we test the link at full distance, that is picture, camera control and power, before the ceiling is closed.

• Integration with the customer's environment: we advise on connecting to the codec, to the control system and to third-party software and hardware, and on how the kit behaves when the camera is swapped for a different model.

• Service, spare parts and warranty: our certified team in Czech, available to the partner throughout the equipment's life. We keep track of the replacement modules and parts by range and handle a warranty claim with the manufacturer on the partner's behalf.

Warranty

The manufacturer warranty on this product is 3 years.

Frequently asked questions