Axeos floor stand for video bar/camera, black

Axeos vybavení jednacích místností are wall shelves for cameras, ceiling and floor mounts for screens, a floor stand for a PTZ camera and stainless steel floor runners for cabling.

Key features

• POTENCE_R ceiling mount: a 40 to 75-inch screen, load 85 kg, stroke 450 mm, swivel 45 degrees left and right and tilt 25 degrees up and down.

• The POTENCE_R has a VESA plate 100 x 100 to 200 x 200 mm and a VESA bar 400 x 400 to 600 x 400 mm, and a cover for a suspended ceiling is included.

• POTENCE_S/P floor to ceiling mount: a 46 to 55-inch screen, load 85 kg, height 2400 to 3200 mm, steel in white or black.

• The POTENCE_S/P is supplied portrait or landscape, stated at ordering, and carries a screen casing.

• PSC camera floor stand: free standing, height 1020 to 1300 mm, steel in black, camera fixed with a screw.

• SMCP wall shelves in plexiglass, measuring 290 x 200 mm and 200 x 220 mm.

Description

A screen where there is neither a wall nor room for a stand

The POTENCE_R ceiling mount hangs a 40 to 75-inch screen from the ceiling, swivels it 45 degrees each way and tilts it 25 degrees. In an open plan office or a glazed hall it is often the only answer.

A camera on the axis of the room

The PSC floor stand holds a PTZ camera at 1020 to 1300 mm, at the eye level of seated people. The camera is not mounted on the screen and can stand wherever the shot needs it.

Floor cabling without a trip hazard

The stainless steel GIS floor runners 100 mm wide cover cables run across the floor to the conference table, in 1 and 2 metre lengths.

Strengths and limits

Where it fits

A screen from the ceiling

The POTENCE_R for a 40 to 75-inch screen in a space with no suitable wall, with a cover for a suspended ceiling.

A screen between floor and ceiling

The POTENCE_S/P for a 46 to 55-inch screen at a height of 2400 to 3200 mm, with a screen casing.

The camera and the cabling in the room

The PSC stand for a PTZ camera, SMCP shelves on the wall and GIS runners for cabling across the floor.

Order variants

The POTENCE_R ceiling mount can also be fixed to a wall. State the screen orientation for the POTENCE_S/P on the order, it is supplied portrait or landscape.

Technical specifications

In the box

Do not forget to order

Variants and products in the range

What to check before ordering and installing

1. Ceiling: on the POTENCE_R check the ceiling load capacity and the type of suspended ceiling

2. Room height: the POTENCE_S/P is for heights of 2400 to 3200 mm

3. Orientation: on the POTENCE_S/P it is chosen at ordering

4. VESA: on the POTENCE_R a plate 100 x 100 to 200 x 200 mm and a bar 400 x 400 to 600 x 400 mm

5. Camera: the PSC stand holds the camera at 1020 to 1300 mm

6. Cabling: GIS runners in 1 and 2 metre lengths, 100 mm wide

The atlantis team will help with every point.

Management and services

• No software, no management: Axeos stands, mounts and furniture are mechanical structures with no firmware and no central management. What is managed is the technology mounted on them.

• Custom finishes: Axeos manufactures in France and supplies most ranges in other finishes, with custom text or with a modified plate. We confirm the lead time and price of such a change with your order.

atlantis services for partners

atlantis is a direct importer and distributor, and we supply through a network of specialist partners. The services below are therefore offered to the partner, not to the end customer. The partner sets the scope. On one project we are only the source of the parts and a consultation, on another we design the whole run and oversee the work, on a third we take on the installation in full.

• Choosing the kit by camera and distance: we pick the kit from the camera or codec the customer already has, how far it sits from the equipment and which interface is used, that is HDMI, USB or fibre. We also say what to do about a device that is not on the compatibility list.

• Route design and building readiness: we go through the cable run with the partner, the category and length of the cabling, the number and position of the boxes, the wall penetration and the space in the rack. On in-wall mounts the opening size and cavity depth are what matters, and we settle those before the order, not on site.

• Completing the order: we match the kit with the right cables, power supply and mount, because that is exactly where jobs are left unfinished. We check that the pieces fit each other by connector and by length, and that nothing the partner needs on day one is missing from the delivery.

• Installation and commissioning: we handle the professional installation in full, or support the partner's own team where needed. Once it is wired we test the link at full distance, that is picture, camera control and power, before the ceiling is closed.

• Integration with the customer's environment: we advise on connecting to the codec, to the control system and to third-party software and hardware, and on how the kit behaves when the camera is swapped for a different model.

• Service, spare parts and warranty: our certified team in Czech, available to the partner throughout the equipment's life. We keep track of the replacement modules and parts by range and handle a warranty claim with the manufacturer on the partner's behalf.

Warranty

The manufacturer warranty on this product is 3 years.

Frequently asked questions