Axeos GALAXY dual - 2 monitor 50"- 70"

Axeos GALAXY is a mobile stand in a metallic black finish for one 55 to 90-inch screen or for two 50 to 75-inch screens, with a camera shelf fixed directly to the screen VESA.

Key features

• One screen 55 to 75", the XL version 80 to 90", both with an 85 kg load.

• Dual screen kits 50 to 70" and 75", both at 40 kg per screen.

• Screen axis 1500 to 1850 mm with one screen, 1410 to 1850 mm with two.

• Camera shelf SCUV3_R1 fixed to the screen VESA, not to the column.

• Base and column in painted steel in metallic black, with a cover skirt and an acrylic glass insert.

• The kit includes the universal technology holder SCUV12.

Description

The camera on the screen, not on the stand

The GALAXY carries the camera shelf on the screen VESA. The camera therefore stays in the same plane as the picture whatever height the screen is set to, which is not the case with a shelf fixed to the column.

A metallic finish for modern interiors

The whole structure is in metallic black, the skirt and the column back carry an acrylic glass insert. It is the most striking of the Axeos mobile ranges.

A wide height range

The screen axis adjusts over 350 mm with one screen and 440 mm on the dual screen kit. The picture can therefore be levelled even in a room with an unusual table height.

Strengths and limits

Where it fits

Meeting rooms and showrooms

One 55 to 75-inch screen with the camera on the VESA is the usual configuration for a meeting room where the look of the stand matters.

Large 80 to 90-inch panels

The XL version GALAXYS8090VCPACK carries an 80 to 90-inch panel weighing 85 kg, with the screen axis going up to 1870 mm.

Two screens

The kits GALAXYD5070VCPACK and GALAXYD75VCPACK carry two panels at 40 kg each. On the version for 75-inch panels the VESA goes up to 400 x 400 mm.

Order variants

We also carry the codes GALAXYS5575DS and GALAXYS8090DS for digital signage. We confirm what those kits contain with your order.

Technical specifications

In the box

Do not forget to order

Variants and products in the range

What to check before ordering and installing

1. Size: base 55 to 75 inches, XL 80 to 90, dual screen 50 to 75

2. Screen weight: 85 kg with one, 40 kg each with two

3. VESA: at most 400 x 400 mm with two 75-inch panels

4. VESA grid: the camera shelf fixes to the VESA, allow for it when choosing the mount

5. Axis height: 1410 to 1870 mm depending on the version

6. Floor and moving: 67 to 105 kg, on casters

7. Finish: metallic black, a logo as an option

The atlantis team will help with every point.

Management and services

• No software, no management: Axeos stands, mounts and furniture are mechanical structures with no firmware and no central management. What is managed is the technology mounted on them.

• Custom finishes: Axeos manufactures in France and supplies most ranges in other finishes, with custom text or with a modified plate. We confirm the lead time and price of such a change with your order.

atlantis services for partners

atlantis is a direct importer and distributor, and we supply through a network of specialist partners. The services below are therefore offered to the partner, not to the end customer. The partner sets the scope. On one project we are only the source of the parts and a consultation, on another we design the whole run and oversee the work, on a third we take on the installation in full.

• Choosing the kit by camera and distance: we pick the kit from the camera or codec the customer already has, how far it sits from the equipment and which interface is used, that is HDMI, USB or fibre. We also say what to do about a device that is not on the compatibility list.

• Route design and building readiness: we go through the cable run with the partner, the category and length of the cabling, the number and position of the boxes, the wall penetration and the space in the rack. On in-wall mounts the opening size and cavity depth are what matters, and we settle those before the order, not on site.

• Completing the order: we match the kit with the right cables, power supply and mount, because that is exactly where jobs are left unfinished. We check that the pieces fit each other by connector and by length, and that nothing the partner needs on day one is missing from the delivery.

• Installation and commissioning: we handle the professional installation in full, or support the partner's own team where needed. Once it is wired we test the link at full distance, that is picture, camera control and power, before the ceiling is closed.

• Integration with the customer's environment: we advise on connecting to the codec, to the control system and to third-party software and hardware, and on how the kit behaves when the camera is swapped for a different model.

• Service, spare parts and warranty: our certified team in Czech, available to the partner throughout the equipment's life. We keep track of the replacement modules and parts by range and handle a warranty claim with the manufacturer on the partner's behalf.

Warranty

The manufacturer warranty on this product is 3 years.

Frequently asked questions