Axeos bracket - wall, 2 monitors 52"-72"

Axeos XENON S-XR is a stand for one 43 to 75-inch screen or for two 52 to 65-inch screens, in two versions depending on whether it stands on casters or is anchored. The manufacturer warranty on it is 10 years.

Key features

• One screen 43 to 75" with a 55 kg load, or two 52 to 65" at 30 kg each.

• VESA up to 600 x 400 mm with one screen, up to 800 x 400 mm with two.

• A footprint of only 800 x 450 mm, the mobile version stands 200 mm from the wall, the static one 131 mm.

• The column holds a removable power strip mounting and a type E power strip is supplied with it.

• Finish in brushed stainless steel or black painted steel, with a removable front plate available in wood tones, colours or with a logo.

• The VC kit includes the camera shelf AX0011 and the technology holder SCUV12.

Description

A kit of parts, not a single model

The order code is built from four choices: the PS or BSS finish, one or two screens (DP), static anchoring (CTW) and the purpose, DS for digital signage or VC for video conferencing. Sixteen combinations cover practically every brief.

A narrow footprint for representative spaces

A footprint of 800 x 450 mm and a distance of 131 mm from the wall on the static version mean the stand is not in the way in a corridor or a reception area. The front plate can be swapped for a wood tone or a plate with the customer logo.

Power sorted from the factory

The column comes prepared for a power strip and a type E strip is supplied. That removes the improvised extension lead that otherwise gets sorted on site with free standing screens.

Strengths and limits

Where it fits

Reception areas and representative spaces

The narrow footprint, the stainless steel finish and a front plate with a logo make the XENON S-XR a stand for places where the screen is seen by customers.

Meeting rooms with one or two screens

The VC kit with the camera shelf and the technology holder covers a meeting room with a screen up to 75 inches. The DP dual screen version takes two 52 to 65-inch panels.

Places where the stand must not move

The static CTW version stands 131 mm from the wall and suits corridors and public areas, where a mobile stand would be in the way or would get pushed around.

Order variants

The code is built from the base XENONSXR-4375, the PS or BSS finish, an optional DP for two screens, an optional CTW for the static version and finally DS or VC. We also carry dual screen kits as XENONSXR-D5265-PS-VC and XENONSXR-D5265-BSS-VC, and we confirm the code with the actual order.

Technical specifications

In the box

Do not forget to order

Variants and products in the range

What to check before ordering and installing

1. Finish: PS black paint, or BSS brushed stainless steel

2. Mobile or static: the static CTW stands 131 mm from the wall and is anchored

3. Number of screens: one 43 to 75 inches, or two 52 to 65 inches with the DP suffix

4. Purpose: VC with the shelf and the technology holder, or DS without them

5. Screen weight: 55 kg with one, 30 kg each with two

6. Bottom edge height: it varies with the screen size, at 75 inches the lowest is 760 mm

7. Front plate: standard, or custom with a decor or a logo

The atlantis team will help with every point.

Management and services

• No software, no management: Axeos stands, mounts and furniture are mechanical structures with no firmware and no central management. What is managed is the technology mounted on them.

• Custom finishes: Axeos manufactures in France and supplies most ranges in other finishes, with custom text or with a modified plate. We confirm the lead time and price of such a change with your order.

atlantis services for partners

atlantis is a direct importer and distributor, and we supply through a network of specialist partners. The services below are therefore offered to the partner, not to the end customer. The partner sets the scope. On one project we are only the source of the parts and a consultation, on another we design the whole run and oversee the work, on a third we take on the installation in full.

• Choosing the kit by camera and distance: we pick the kit from the camera or codec the customer already has, how far it sits from the equipment and which interface is used, that is HDMI, USB or fibre. We also say what to do about a device that is not on the compatibility list.

• Route design and building readiness: we go through the cable run with the partner, the category and length of the cabling, the number and position of the boxes, the wall penetration and the space in the rack. On in-wall mounts the opening size and cavity depth are what matters, and we settle those before the order, not on site.

• Completing the order: we match the kit with the right cables, power supply and mount, because that is exactly where jobs are left unfinished. We check that the pieces fit each other by connector and by length, and that nothing the partner needs on day one is missing from the delivery.

• Installation and commissioning: we handle the professional installation in full, or support the partner's own team where needed. Once it is wired we test the link at full distance, that is picture, camera control and power, before the ceiling is closed.

• Integration with the customer's environment: we advise on connecting to the codec, to the control system and to third-party software and hardware, and on how the kit behaves when the camera is swapped for a different model.

• Service, spare parts and warranty: our certified team in Czech, available to the partner throughout the equipment's life. We keep track of the replacement modules and parts by range and handle a warranty claim with the manufacturer on the partner's behalf.

Warranty

The manufacturer warranty on this product is 10 years.

Frequently asked questions