Axeos bracket - wall, 1 monitor 75-100"

Axeos PIXEL is a stand for a 65 to 86-inch screen with a motorised lift over 1035 to 1465 mm, on 100 mm casters. It is built for classrooms and training rooms where the screen is watched by people both seated and standing.

Key features

• Screen 65 to 86" with an 85 kg load.

• VESA 200 x 200 mm to 800 x 400 mm.

• A motorised lift over 1035 to 1465 mm, a travel of 430 mm.

• 100 mm casters as standard, a static version is an option.

• A centre plate in a custom finish, wood tone, colour, logo or graphics.

• A 10 year manufacturer warranty.

Description

A lift that goes low, not just above the table

The lowest position of 1035 mm is lower than on the other Axeos lift ranges, where the travel starts at 1300 or 1400 mm. In a classroom that means people in the front rows still see the screen when the work is done seated.

A mobile chassis with large casters

The 100 mm casters cope with thresholds and cable trunking. The stand can therefore genuinely be moved between classrooms, not only within one room.

The front plate as part of the interior

The centre plate is made in a wood tone, in a colour, with a logo or with graphics. In training spaces that ties the stand in with the rest of the fittings.

Strengths and limits

Where it fits

Classrooms and training rooms

The 1035 to 1465 mm travel covers both seated work and standing presentation, which is the main reason the PIXEL is bought for classrooms.

Spaces shared between rooms

The 100 mm casters and the mobile chassis allow one screen to be moved between several rooms instead of buying one for each.

Order variants

The custom front plate is ordered as PIXEL_PLATE_SP. We confirm the difference between the codes PIXELS6586DS and PIXELLIFT6586DS with your order.

Technical specifications

In the box

Do not forget to order

Variants and products in the range

What to check before ordering and installing

1. Panel size and weight: 65 to 86 inches, up to 85 kg

2. Power: the lift is motorised and needs a socket at the position

3. Floor and thresholds: 100 mm casters, check the route between rooms

4. Lowest position: 1035 mm, check it against the height of tables and rows

5. Plate finish: standard or custom

6. Video conferencing: the camera and codec holder is ordered separately

7. Static version: it is an option, casters are the standard

The atlantis team will help with every point.

Management and services

• No software, no management: Axeos stands, mounts and furniture are mechanical structures with no firmware and no central management. What is managed is the technology mounted on them.

• Custom finishes: Axeos manufactures in France and supplies most ranges in other finishes, with custom text or with a modified plate. We confirm the lead time and price of such a change with your order.

atlantis services for partners

atlantis is a direct importer and distributor, and we supply through a network of specialist partners. The services below are therefore offered to the partner, not to the end customer. The partner sets the scope. On one project we are only the source of the parts and a consultation, on another we design the whole run and oversee the work, on a third we take on the installation in full.

• Choosing the kit by camera and distance: we pick the kit from the camera or codec the customer already has, how far it sits from the equipment and which interface is used, that is HDMI, USB or fibre. We also say what to do about a device that is not on the compatibility list.

• Route design and building readiness: we go through the cable run with the partner, the category and length of the cabling, the number and position of the boxes, the wall penetration and the space in the rack. On in-wall mounts the opening size and cavity depth are what matters, and we settle those before the order, not on site.

• Completing the order: we match the kit with the right cables, power supply and mount, because that is exactly where jobs are left unfinished. We check that the pieces fit each other by connector and by length, and that nothing the partner needs on day one is missing from the delivery.

• Installation and commissioning: we handle the professional installation in full, or support the partner's own team where needed. Once it is wired we test the link at full distance, that is picture, camera control and power, before the ceiling is closed.

• Integration with the customer's environment: we advise on connecting to the codec, to the control system and to third-party software and hardware, and on how the kit behaves when the camera is swapped for a different model.

• Service, spare parts and warranty: our certified team in Czech, available to the partner throughout the equipment's life. We keep track of the replacement modules and parts by range and handle a warranty claim with the manufacturer on the partner's behalf.

Warranty

The manufacturer warranty on this product is 10 years.

Frequently asked questions