Axeos BOXER příslušenství - bílé řešení

Axeos BOXER is a mobile stand for one or two screens with adjustable height and a camera shelf, supplied either as a bare stand for digital signage or as a video conferencing kit with a shelf and a codec holder.

Key features

• Screen 40 to 65", VESA from 200 x 200 mm to 600 x 400 mm on a single screen.

• Load capacity 55 kg for one screen, 30 kg per screen in the dual screen kit.

• Screen axis adjustable 1300 to 1700 mm, camera shelf 770 to 935 mm.

• Painted steel base in black matt on casters, column in brushed stainless steel.

• Rear cover of the column in black plexiglass, accessible, so the technology stays within reach.

• The VCPACK kit includes the camera shelf AX0011 and the technology holder SCUV12.

Description

A kit that works straight out of the crate

The VCPACK version arrives with a camera shelf and a codec holder, so a video conferencing position is built without hunting for parts. For digital signage the same structure exists without them, under a code with the DS suffix.

Both planes adjustable

Both the screen axis over a 400 mm range and the camera shelf over a 165 mm range are adjustable. The camera can therefore be levelled with the eyes of seated people regardless of how high the screen hangs.

Mobility that does not disturb the cabling

The base is on casters and the stand can be moved between rooms. The technology stays behind the plexiglass rear cover of the column, the cabling runs inside and survives the move.

Strengths and limits

Where it fits

Meeting rooms for up to ten people

One 55 to 65-inch screen with the camera on a shelf at 770 to 935 mm covers a usual meeting room. The VCPACK kit is built for exactly this.

Two screens for the picture and the shared content

The dual screen kit separates the video call from the shared content. Count on the 30 kg per screen limit and, with two 55-inch panels, a VESA ceiling of 400 x 400 mm.

Digital signage without video conferencing

The version with the DS suffix is the same stand without the shelf and the codec holder, for a screen with content in a reception area or a shop.

Order variants

We carry the white finish on some codes with the /WHITE suffix, at the manufacturer it is a finish option. The manufacturer carries the dual screen kit as BOXERD4055VCPACK, so we confirm the code with your order.

Technical specifications

In the box

Do not forget to order

Variants and products in the range

What to check before ordering and installing

1. Version: VCPACK with the shelf and the codec holder, or DS without them

2. Number of screens: one up to 65 inches, or two up to 55 inches

3. Screen weight: 55 kg for one, 30 kg each for two

4. VESA: at most 400 x 400 mm with two 55-inch panels

5. Camera height: the shelf sits at 770 to 935 mm, check it against the table height

6. Finish: black from stock, white as an option

7. Delivery: 55 to 78 kg, two people and a lift on site

The atlantis team will help with every point.

Management and services

• No software, no management: Axeos stands, mounts and furniture are mechanical structures with no firmware and no central management. What is managed is the technology mounted on them.

• Custom finishes: Axeos manufactures in France and supplies most ranges in other finishes, with custom text or with a modified plate. We confirm the lead time and price of such a change with your order.

atlantis services for partners

atlantis is a direct importer and distributor, and we supply through a network of specialist partners. The services below are therefore offered to the partner, not to the end customer. The partner sets the scope. On one project we are only the source of the parts and a consultation, on another we design the whole run and oversee the work, on a third we take on the installation in full.

• Choosing the kit by camera and distance: we pick the kit from the camera or codec the customer already has, how far it sits from the equipment and which interface is used, that is HDMI, USB or fibre. We also say what to do about a device that is not on the compatibility list.

• Route design and building readiness: we go through the cable run with the partner, the category and length of the cabling, the number and position of the boxes, the wall penetration and the space in the rack. On in-wall mounts the opening size and cavity depth are what matters, and we settle those before the order, not on site.

• Completing the order: we match the kit with the right cables, power supply and mount, because that is exactly where jobs are left unfinished. We check that the pieces fit each other by connector and by length, and that nothing the partner needs on day one is missing from the delivery.

• Installation and commissioning: we handle the professional installation in full, or support the partner's own team where needed. Once it is wired we test the link at full distance, that is picture, camera control and power, before the ceiling is closed.

• Integration with the customer's environment: we advise on connecting to the codec, to the control system and to third-party software and hardware, and on how the kit behaves when the camera is swapped for a different model.

• Service, spare parts and warranty: our certified team in Czech, available to the partner throughout the equipment's life. We keep track of the replacement modules and parts by range and handle a warranty claim with the manufacturer on the partner's behalf.

Warranty

The manufacturer warranty on this product is 3 years.

Frequently asked questions