7 in. Tabletop Touch Screen, Black Smooth

Crestron TS-770 and TS-880 are 7 in. and 8.1 in. tabletop touch screens for meeting rooms, classrooms and residential installations. The screen sits freely on the table on its own wedge base, takes power and data from a single network cable over PoE or PoE+, and needs no electrical box in the wall. TS-770 belongs to the TS-70 Series, TS-880 to the newer TS-80 Series with gigabit Ethernet, USB-C, Wi-Fi 6E and a proximity sensor.

Key features

• 7 in. (178 mm) display on TS-770 and 8.1 in. (204 mm) on TS-880, both 1280 × 800 pixels, 16:10 WXGA

• Projected capacitive touch with 5-point multitouch, ±80° horizontal and ±80° vertical viewing angle

• A single network cable carries power and data, PoE+ PD to IEEE 802.3at Type 2

• Built-in microphone and speakers, Rava SIP intercom

• TS-880 adds gigabit Ethernet, USB-C, Wi-Fi 6E, Bluetooth 5.2 and a radar proximity sensor

• The GV government version drops the microphone, Bluetooth and Wi-Fi; the R version is dedicated to the Crestron Home OS application

Tabletop TS, not wall mount TSW

Strengths and limits

Room fit

The screen is not chosen by headcount but by what is controlled from it and how many elements the operator needs on screen. The 1280 × 800 resolution is the same on both sizes, so 8.1 in. offers a larger area, not a finer image.

Operating modes

Connectivity, network and power

In the box

TS-770 and TS-880 variants

Recommended additions

Technical specifications

Downloads

• Product Manual TS-70 Series, Specifications TS-770

• Product Manual TS-70 Series, Features TS-770

• Product Manual TS-880 and TS-1080, Specifications TS-880

• Product Manual TS-880 and TS-1080, Features TS-880

• TS-880-B catalogue page

Management and services

• XiO Cloud: cloud management for Crestron devices. The base tier is free and covers commissioning, bulk firmware updates, configuration, real-time device status and alerts. The Premium tier adds web-based remote control, scheduled actions, dashboards, historical reports and management of third-party devices. It is licensed by device count.

• Integrator tools: configuration and diagnostics through Crestron Toolbox, the device web interface and the control system. A device registers with XiO Cloud over a single outbound connection on port 443, with no inbound access into the network.

atlantis services for partners

atlantis is a direct importer and distributor, and we supply through a network of specialist partners. The services below are therefore offered to the partner, not to the end customer. The partner sets the scope. On one project we are only the source of the parts and a consultation, on another we design the whole run and oversee the work, on a third we take on the installation in full.

• Choosing the kit by camera and distance: we pick the kit from the camera or codec the customer already has, how far it sits from the equipment and which interface is used, that is HDMI, USB or fibre. We also say what to do about a device that is not on the compatibility list.

• Route design and building readiness: we go through the cable run with the partner, the category and length of the cabling, the number and position of the boxes, the wall penetration and the space in the rack. On in-wall mounts the opening size and cavity depth are what matters, and we settle those before the order, not on site.

• Completing the order: we match the kit with the right cables, power supply and mount, because that is exactly where jobs are left unfinished. We check that the pieces fit each other by connector and by length, and that nothing the partner needs on day one is missing from the delivery.

• Installation and commissioning: we handle the professional installation in full, or support the partner's own team where needed. Once it is wired we test the link at full distance, that is picture, camera control and power, before the ceiling is closed.

• Integration with the customer's environment: we advise on connecting to the codec, to the control system and to third-party software and hardware, and on how the kit behaves when the camera is swapped for a different model.

• Service, spare parts and warranty: our certified team in Czech, available to the partner throughout the equipment's life. We keep track of the replacement modules and parts by range and handle a warranty claim with the manufacturer on the partner's behalf.

Warranty

The standard warranty on Crestron hardware in Europe is 3 years from the date of Crestron shipment. For motors and moving mechanical parts it is 1 year.

FAQ